RE1482 5/16" Center Pin - New 5/16" center pin pair with nuts
Application: universal. Choose pin diameter for you application. Pin length is longer than needed and will be cut down after installation

RE1483 3/8" Center Pin - New 3/8" center pin pair with nuts
Application: universal. Choose pin diameter for you application. Pin length is longer than needed and will be cut down after installation

RE1465 Degree Shim 2.5" X 2* Alum - Aluminum axle degree shim 2* Application: YJ,CJ,XJ. This 2 degree axle shim is used to rotate pinion up or down to phase driveshaft or set castor on front axle

RE1467 Degree Shim 2.5" X 4* Steel - Steel Degree shim 4*
Application: YJ,CJ,XJ. We make these shims from solid steel for maximum durability. Designed to handle the rigors of trail use, these shims actually become part of the spring pack with included center pins. Many other shims on the market float between the spring pack and the spring perch reducing the engagement of the center pin. Our design will not come loose or fall out. Can be used front or rear to set pinion angles. 2.5" wide springs only.

RE1468 Degree Shim 2.5" X 6* Steel - Steel Degree shim 6*
Application: YJ,CJ,XJ. We make these shims from solid steel for maximum durability. Designed to handle the rigors of trail use, these shims actually become part of the spring pack with included center pins. Many other shims on the market float between the spring pack and the spring perch reducing the engagement of the center pin. Our design will not come loose or fall out. Can be used front or rear to set pinion angles. 2.5" wide springs only.

RE1469 Degree Shim 2.5" X 8* Steel - Steel Degree shim 8*
Application: YJ,CJ,XJ. We make these shims from solid steel for maximum durability. Designed to handle the rigors of trail use, these shims actually become part of the spring pack with included center pins. Many other shims on the market float between the spring pack and the spring perch reducing the engagement of the center pin. Our design will not come loose or fall out. Can be used front or rear to set pinion angles. 2.5" wide springs only.