You can now replace the stock wimpy tie rod and drag link on your 1972-1986 Jeep® CJ with our Heavy Duty Tie-Rod/Drag-link Kit.
Manufactured from 1" O.D. x .219-wall DOM steel tubing, threaded on each end for 5/8 left and right rod ends, with wrench flats on each end. The rod ends are race-car quality, Teflon®/Kevlar® lined, self lubricating and the alloy steel heat treated body is plated for durability.

Rods will mount over or under the knuckles, and you must must drill the stock tapered hole to a straight 5/8" hole.

Jam nuts and grade-8 hardware are provided. Available in bare steel (no paint) or zinc-plated.

Note: Custom Applications available in addition to those listed below.