The Frame Tie-In Kit consists of two weld-on frame outriggers, urethane bushings, bolts with lock and fender washers. The outriggers support the front foot plates of the cage from underneath the body tub. Polyurethane body bushings eliminate metal to metal contact between the frame and body, and allow for flex. The 9/16" bolt threads up into the stub on the bottom of the TJ foot plate is sandwiched between the polyurethane bushings. This can be used with a 1" body lift by combining it with a 1" body puck (as shown at left).

FTK200.....1997-2001 Jeep® TJ Wrangler.

1987-1995 JEEP® YJ WRANGLER. 1976-1986 JEEP® CJ-5,* CJ-7*, CJ-8*
For use with M.O.R.E. Sport Cage.
The Frame Tie-In Kit consists of two weld-on frame outriggers, urethane bushings, and bolts with self-locking nuts and fender washers. The outriggers support the front foot plates of the cage from underneath the body tub. The floor drain plug is removed and the existing hole is used to locate where to drill for the ½" bolt that ties the foot plate to the outrigger. Polyurethane body bushings eliminate metal to metal contact between the frame and body, and allow for flex.



WCK101.....1987-1995 JEEP® YJ WRANGLER. 1976-1986 JEEP® CJ-5,* CJ-7*, CJ-8*.

* If you have a CJ-5, CJ-7, CJ-8, you must have a front cage kit installed where the foot plate covers the factory drain hole in the floor