Reinforce the frame of your Jeep® CJ with these 3/16" thick steel plates. Pre-punched holes line up perfectly, and their contour cut to the shape of the frame. Weld them on the outside of the frame and add serious strength to the stock weak design. Available for the front or rear of the Jeep® CJ.

FP200.....1976-1986 Jeep® CJ-5, CJ-7. REAR. (will fit CJ-8 but will not extend all the way to the rear crossmember). Will not fit 1972-1975. The rear plates are 3-1/2 feet long. They start at the rear body mount outrigger and go up over the rear axle to the rear crossmember. The rear plates also come with two lower plates to reinforce the shackle hanger area of the frame.

FP300.....1976-1986 Jeep® CJ-5, CJ-7, CJ-8. FRONT. (can fit 1972-1975 with minor mods.) These start at the front bumper and extend past the first body mount outrigger. Note: The FP300 replaced the shorted FP100 as of 10-01-00.