"Long Travel" Shock Mount Cage for CJ's
M.O.R.E. has developed the product that you have been waiting for! Bolt-on Long Travel Shock Mounts for 1972-1986 Jeep® CJ's. It will bolt on to existing holes in 82 and newer frames with out any drilling, grinding or welding. 72-81 frames do require some mods but it’s minor.

This Long Travel Shock Mount Cage has a left tower, right tower, and engine cross-over brace. The brace is high enough in the engine compartment that it is just under the rods that connect the grille to the firewall. It fits 258 (4.2L) engines with minor mods to the air intake hose. It fits with AMC V-8's by locating the entire set-up forward slightly to clear the power steering pump. It will not fit on AMC V-8's that have the factory smog pump below the power steering pump! It will fit with CJ's that have Chevy V-8's installed. Shipped bare steel, un painted.

Shock Hoop "KIT" for CJ's
Are you a welder/fabricator but don?t have a tube bender or the time cut out all of the necessary tabs to make your own shock mounts? Then this is the kit for you! It comes with two hoops made from 1.5" x .120" wall steel tubing, tabs for dual shocks, flanges to bolt the hoops to the frame, braces that can be used for triangulating the hoops back to the frame or across the engine as a engine cage. Universal bushing assemblies and all the bolts, nuts, sleeves and hardware needed. You can run up to a 13" stroke shock with this kit! You weld the tabs on the hoops where you want them, install the axle housing tabs where you want them, the braces where you want them, mount the hoops where you want them, cut the sheet metal fender where you want to, and the whole thing comes out the way you want it to!!! Shipped bare steel, un painted