|
|
||||
 |
 |
 |
 |
 |
 |
 |
 |
Reinforce the power steering gear box to the frame with this heavy-duty brace. If you have tires larger then stock, this brace is a much needed item. It is the best insurance you can install on your Jeep® to keep the box from being "torn" off the frame. The brace is painted with a tough "Hammerite" silver-gray paint and the clamp is zinc plated gold. All mounting hardware included, simple bolt-on design. No drilling or mods required (for most applications). |
 |
 |
|
This is our newest Steering Brace, for the XJ Cherokee.
|
Shown here installed on a Jeep® TJ Wrangler.
|
|
PART NUMBER
|
DESCRIPTION
|
APPLICATION
|
NOTES
|
|
SB9037
|
Steering Brace
|
76-86 Jeep® CJ-5, CJ-7, CJ-8
|
|
|
SB9037W
|
Steering Brace
|
87-95 Jeep® YJ Wrangler
|
|
|
SB9037TJ
|
Steering Brace
|
97-2001 Jeep® TJ Wrangler
|
Shown above on left
|
|
SB9037XJ
|
Steering Brace
|
1987-2000 Jeep® XJ Cherokee
|
Shown above on left
|
 |
Have you got a vehicle that you want to build your own steering box brace for but don't want to fight trying to build the complex clamp at the box end? We have the answer for you! Buy just the clamp and fabricate the tube yourself. Comes with bolts, crimp-lock nuts, washers and two zinc-plated brackets |
|
PART NUMBER
|
DESCRIPTION
|
APPLICATION
|
NOTES
|
|
SB9037C
|
Clamp only
|
Power Steering Boxes
|
UNIVERSAL
|
|
|
|
The stock Jeep® CJ steering box mounts are stamped
steel (1/8"), and not known for their strength. If you have tires
larger then 33", and a front locker, the steering brace above is
not enough to hold the box in place. This Heavy Duty Steering Box Mount
is made from 1/2" thick steel and will lock the box to the frame
better then any other method. All mounting hardware included. Works with
a Shackle Reversal System, or stock set-up.
|
 |
 |
 |
|
PART NUMBER
|
DESCRIPTION
|
APPLICATION
|
NOTES
|
|
SB7686
|
Steering Box Mount H.D.
|
76-86 Jeep® CJ-5, CJ-7, CJ-8
|
Unpainted
|
|
SB7686Z
|
Steering Box Mount H.D.
|
76-86 Jeep® CJ-5, CJ-7, CJ-8
|
Zinc Plated
|