Full Size XJ Gear Sport cages

Bolt-in Sport Cage System

Click here for more pictures!
Our Sport Cage Part # WCK200 fits 1997-2001 Jeep® TJ Wrangler vehicles. It will fit with hard top, or soft top, full hard doors or half hard doors. No dash mods required, No welding. The stock latches for the top will clear the Sport Cage cross bar, and the sun visors can be retained in the stock location. Window cranks will roll with the doors closed. The factory soft top door surrounds attach to the left and right side bars just like the stock horizontal bars. No drilling to the TJ body tub is required! It is UPS-ship-able, and comes bare steel, un-painted. This way, you can paint it to match your TJ! This Sport Cage has been designed to be as easy to install as possible.

It uses two bars (left & right), that replace the OEM horizontal bars, and a cross bar connects the left & right side bars together just behind the windshield frame. The new L&R bars make a tight bend at the windshield, then extend all the way to the floor. The footplates have a pre-welded and threaded stub that inserts into the floor drain hole, then a 9/16" bolt threads into this stub from the bottom side. This is the strongest point on the body tub and best method of attachment. (Most competitors sport cages attach to the dash, which is great for looks, and giving a bit more entry/exit room, however, it does very little from a strength standpoint.) An optional Frame Tie-In Kit (part # FTK200) is available, for the ultimate in strength.

It comes with "L" brackets that attach into the stock holes in the windshield frame and then bolt to the Sport Cage. We have designed it this way so it is very easy to fold the windshield down. All necessary hardware is provided.

We now have as an option, extra overhead bars that bolt in place (between the factory roll bar and our front crossbar, as seen in photo on right). These bars make it great to install a C.B. radio overhead! Click here for more pictures! We now have padding kits available, see below!

Shown above is the WCK200, TJ Sport Cage kit.

Shown above is the WCK200 installed, with two, optional WCK350 Center Bars.

WCK200.....Sport Cage. 1997-2001 Jeep® TJ Wrangler. 3-piece set with hardware. UPS shippable ! Saves truck freight !

CP200.....Padding/Cover kit. Includes padding with sewn-in black fabric cover matches factory roll bar cover in appearance and texture. Velcro attachment. 3-piece set, covers the vertical section of the left & right bars, and cross bar. Stock padding/covers to be used on the horizontal section of the left & right bars. (If you have additional bolt in center bars {below}, please call for padding prices.)

WCK350....Bolt-In Center Bar and hardware (shown below), 1997-2001 Jeep® TJ Wrangler (sold each). Add as many as you desire, most folks install a pair, and this gives you a total of 4-overhead bars. Please note: It is easier to install the Center Bars when installing the Sport Cage the first time, however, you can return to do it at a later date.

1997-2001 TJ Wrangler

Bolt-In Center Bar kit

1997-2001 TJ Wrangler

See Universal-Fit Padding at bottom of page!

Our Sport Cage kit uses two curved bars (left & right) to attach to the factory roll bar (with the factory "stubs") in place of the stock horizontal bars that connect the windshield frame to factory the roll bar. A cross bar connects the left & right bars together just behind the windshield frame. It slips over the pre-welded stubs and is secured in place with thru-bolts. Floor plates are welded and pre-punched and act as a guide for you to drill your floor. All necessary hardware is provided, including brackets that attach it to the windshield frame. This Sport Cage fits great with hard or soft tops, full or half hard doors*. It is built in a jig for accuracy out of 1-3/4" x .120 HREW steel tubing, and is shipped un-painted, bare steel.

A Frame Tie-In Kit is available as an option. Also, we now have available, optional Bolt-In Center Bars (between the factory roll bar and our front crossbar) as seen in the photos below. These bars make it great to install a C.B. radio overhead!
* With full hard doors, you must open the door to crank the window.

WCK100.....Sport Cage. 1987-1995 Jeep® YJ Wrangler. UPS shippable ! Saves truck freight !

CP100.....Padding/Cover Kit. Includes padding with sewn-in black fabric cover, Velcro attachment. (3-piece set, covers the vertical section of the left & right bars, and cross bar. Stock padding/covers to be used on the horizontal section of the left & right bars). (If you have additional bolt in center bars {below}, please call for padding prices.)

WCK375....Bolt-In Center Bar and hardware (shown below),1987-1995 Jeep® YJ Wrangler (sold each). Add as many as you desire, most folks install a pair, and this gives you a total of 4-overhead bars. Please note: It is easier to install the Center Bars when installing the Sport Cage the first time, however, you can return to do it at a later date.

Bolt-In Center Bar Kit

This Sport Cage fits in Jeep® CJ-7 vehicles where the factory roll bar "main hoop" bolts to the floor. It will fit with hard top, or soft top, full hard doors or half hard doors (YJ). It uses two curved bars (left & right) to attach to the factory roll bar with "connectors" (provided), that you must weld to the factory roll bar. The L&R side bars bolt to these connectors. The cross bar connects the L&R side bars together just behind the windshield frame, by slipping over the pre-welded stubs, and is secured with bolts. All necessary hardware is provided. This Sport Cage has been designed to be as easy to install as possible. Sold bare steel, no paint. This cage is UPS shippable.

As an option, M.O.R.E. has available as an option, weld-in or Bolt-In Center Bars. Padding/Covers is also available. See below.

A Frame Tie-In Kit is available as an option.

WCK150.....Sport Cage. 1981-1986 Jeep® CJ-7. UPS shippable ! Saves truck freight !

CP150.....Padding/Cover kit. Includes padding with sewn-in black fabric cover, with Velcro attachment. (5-piece set, covers all cage area). If you have additional bolt in center bars (below), please call for padding prices.

WCK325.....Weld-in Center Bar. (shown below), 1981-86 Jeep® CJ-7 (sold each). Add as many as you desire, most folks install a pair, and this gives you a total of 4-overhead bars.

Weld-In Center Bar Kit

Bolt-In Center Bar Kit

PART NUMBER	DESCRIPTION	APPLICATION	NOTES
WCK100	Sport Cage	1987-95 YJ Wrangler	3-piece W/ hardware
WCK375	Bolt-In Center Bar Kit	1987-95 YJ Wrangler	EACH
CP100	Padding/Cover Kit	1987-95 YJ Wrangler	3-piece set

PART NUMBER	DESCRIPTION	APPLICATION	NOTES
WCK150	Sport Cage	1981-86 CJ-7	3-piece W/ hardware
WCK325	Weld-In Center Bar Kit	1981-86 CJ-7	EACH
WCK375	Bolt-In Center Bar Kit	1981-86 CJ	EACH
CP150	Padding/Cover Kit	1981-86 CJ-7	5-piece set

PART NUMBER	DESCRIPTION	APPLICATION
CP6	Padding, 6" length	Universal
CP8	Padding, 8" length	Universal
CP17	Padding, 17" length	Universal
CP18	Padding, 18" length	Universal
CP25	Padding, 25" length	Universal
CP30	Padding, 30" length	Universal
CP46	Padding, 46" length	Universal


Shown above is the WCK200, TJ Sport Cage kit.	Shown above is the WCK200 installed, with two, optional WCK350 Center Bars.

	Shown here are the adapters that bolt on to the factory roll bar (with minor drilling) to install optional Center Bars. (Part of the WCK350 Center Bar Kit.) Click here for more pictures!


	This Universal-Fit Sport Cage Padding is 1/2" thick and is sewn into the black fabric that comes very close to matching the factory roll-bar covers (fot TJ Wranglers) in appearance and texture. It attaches itself with VelcroTM. Available in pre-cut lengths for your individual application.