|
|
|
PREMIUM SERIES CLASSIC DESIGN. PROVEN PERFORMANCE
|
|
|
|
XD9000i SELF-RECOVERY WINCH
You'll probably see more XD9000i winches on trail rigs than any other
winch. No load line speed of 38-feet per minute and three-stage planetary
gearing and the ability to run cool with low amp draw for long winching
cycles are just a few reasons why.
XD9000i SPECS/PART NUMBERS
Part Number: PN 27550 CE (12V DC)
Rated Line Pull: 9000 lbs. (4080 kgs.) single-line
Motor: 12V 4.6 hp, 24V 2.5 hp, Series WoundTM
Remote Control: Remote switch, 12' (3.7m) lead
Geartrain: 3-Stage Planetary
Gear Ratio: 156:1
Lubrication: Aeroshell #17
Clutch (freespooling): Sliding Ring Gear
Brake: Automatic Direct Drive Cone
Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)
Weight: 85 lbs. (38.5 kgs.)
Wire Rope: 125', 5/16" diameter (38m, 8mm diameter)
Fairlead: Roller
Recommended Battery: 650 CCA minimum for winching
Battery Leads: 2 gauge, 72" (1.83m)
Finish: Argent Powder Coat
Nuts/Bolts: PN 39570
CE Winches: CE products are designed to meet European Standards. CE winches
include CE labels, Manuals, Safety Hook and Thimble.
|
|
|
|
XD9000i MULTI-MOUNTTM PORTABLE
All the power and reliability of the XD9000i in a portable package. No-load
retrieval line speed is fast-38 feet/minute. Integrated control pack protects
the winch's electrical components, and the 4.6hp Series WoundTM motor
delivers big torque and power. Plugs into any standard 2" Class III
receiver hitch and gives you the ability to move the winch from the front
or back of your rig. Power is supplied through quick connect plugs. A
good choice for full-size rigs and heavier recovery situations.
This Kit includes winch, remote, carrier, 7.5' power lead with quick
connect plug for front of vehicle and hawse fairlead. Front receiver and
rear power lead sold separately.
XD9000i MULTI-MOUNTTM SPECS/PART NUMBERS
Part Number: PN 37441
Rated Line Pull: 9000 lbs. (4080 kgs.) single-line
Motor: 12V 4.6hp, Series WoundTM
Remote Control: Remote switch, 12' (3.7m) lead
Geartrain: 3-Stage Planetary
Gear Ratio: 156:1
Lubrication: Aeroshell #17
Clutch (freespooling): Sliding Ring Gear
Brake: Automatic Direct Drive Cone
Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)
Weight: 104 lbs. (47 kgs.)
Wire Rope: 125', 5/16" diameter (38m, 8mm diameter)
Fairlead: Hawse
Recommended Battery: 650 CCA minimum for winching
Battery Leads: Front heavy-duty 7.5'/2.2m with quick connect plug
Finish: Argent Powder Coat
|
|
|
|
XD9000 SELF-RECOVERY WINCH
A long-time best seller, the XD9000's compact body and separate control
pack lets it work effectively in very tight spaces. It uses the 4.6 hp
Series WoundTM motor and three-stage planetary gearing offered on most
of our winches, so torque and line speed are outstanding. A quiet, double-durable
winch, pure and simple.
XD9000 SPECS/PART NUMBERS
Part Numbers: PN 28500 CE (12V DC) , PN 265012 CE (24V DC)
Rated Line Pull: 9000 lbs. (4080 kgs.) single-line
Motor: 12V 4.6 hp, 24V 2.5 hp Series WoundTM
Remote Control: Remote switch, 12' (3.7m) lead
Geartrain: 3-Stage Planetary
Gear Ratio: 156:1
Lubrication: Aeroshell #17
Clutch (freespooling): Sliding Ring Gear
Brake: Automatic Direct Drive Cone
Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)
Weight: 78 lbs. (35 kgs.)
Wire Rope: 100', 5/16"diameter (30m, 8mm diameter)
Fairlead: Roller
Recommended Battery: 650 CCA minimum for winching
Battery Leads: 2 gauge, 72" (1.83m)
Finish: Argent Powder Coat
Nuts/Bolts: PN 39625
CE Winches: CE products are designed to meet European Standards. CE winches
include CE labels, manuals, roller fairlead, safety hook and thimble.
|
|
|
|
M8000 SELF-RECOVERY WINCH
Compact. Tough. An outstanding value for trucks, sport utility vehicles
and Jeeps. The M8000, with its 4.8-hp Series Wound motor and 3-stage planetary
geartrain, packs 8,000 lbs. of pulling power to get the job done. Available
with either 80' of wire rope and hawse fairlead or 100' of wire rope and
roller fairlead. Pulls a fast 8 ft. per minute at rated load.
M8000 SPECS/PART NUMBERS
Part Number: PN 20910 CE (12V DC) 80' wire rope and hawse fairlead
Part Number: PN 26502 CE (12V DC) 100' wire rope and roller fairlead
Part Number: PN 265032 CE (24V DC) 100' wire rope, roller fairlead, safety
hook and thimble
Rated Line Pull: 8000 lbs. (3630 kgs.) single-line
Motor: 12V 4.8 hp, 24V 2.1 hp, Series WoundTM
Remote Control: Remote switch, 12' (3.7m) lead
Geartrain: 3-Stage Planetary
Gear Ratio: 216:1
Lubrication: Aeroshell #17
Clutch (freespooling): Sliding Ring Gear
Brake: Automatic Direct Drive Cone
Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)
Weight: 74 lbs. (34 kgs.)
Wire Rope: 80', 5/16" diam. (24m, 8mm diam.) or 100', 5/16"
diam. (30m, 8mm diam.)
Fairlead for PN 20910: Hawse
Fairlead for PN 26502, 265022, 265032: Roller
Recommended Battery: 650 CCA minimum for winching
Battery Leads: 2 gauge, 72" (1.83m)
Finish: Argent Gray Powder Coat
Nuts/Bolts: PN 39625
|
|
|
|
M8274-50 SELF-RECOVERY WINCH
Loved by off-roaders who compete, it's our fastest winch. No load retrieval
speed for the M8274-50 is 73.4 feet per minute and that's not all. At
150 feet of 5/16" cable, it also has a very long line capacity. Its
unique spur-gear drive train and upright design are totally rugged. Its
braking system delivers smooth operation with superior heat dissipation.
Roller fairlead, remote control on 12-ft. lead, free spool clutch and
battery cables are included.
M8274-50 SPECS/PART NUMBERS
Part Numbers: PN 38631 CE (12V DC) , PN 375832 CE (24V DC)
Rated Line Pull: 8000 lbs. (3630 kgs.) single-line
Motor: 12V 4.6 hp/3.43kw, 24V 2.5 hp/3.43kw, Series WoundTM
Remote Control: Remote switch, 12' (3.7m) lead
Geartrain: Spur Gear
Gear Ratio: 134:1
Lubrication: 6 oz. SAE 30 (non-detergent)
Clutch (freespooling): Sliding Motor Pinion Gear
Brake: Automatic, disc type
Drum Diameter/Length: 3.5"/8.5" (9cm/22cm)
Weight: 110 lbs. (50 kgs.)
Wire Rope: 150', 5/16" diameter (46m, 8mm diam.)
Fairlead: Roller
Recommended Battery: 650 CCA for winching
Battery Leads: 2 gauge, 72" (1.83m)
Finish: Argent Gray Powder Coat with Clear Coat
Nuts: PN 7616, L/W: PN 2146
Bolts: PN 7165
CE Winches: CE products are designed to meet European Standards. CE winches
include CE labels, manuals, roller fairlead, safety hook and thimble.
|
|
|
|
M6000 SELF-RECOVERY WINCH
This is our medium-to-light duty winch. But it's no weakling. Designed
to be compact, its 4.8 hp Series WoundTM motor can still pull 6,000 lbs.,
making it ideal for smaller vehicles with big ideas.
M6000 SPECS/PART NUMBERS
Part Numbers: PN 45880 CE (12V DC), PN 465052 CE (24V DC)
Part Numbers:: PN 37959 CE (12V, DC) Short Drum
Rated Line Pull: 6000 lbs. (2720 kgs) single-line
Motor: 12V 4.8 hp, 24V 2.1 hp, Series WoundTM
Remote Control: Remote switch, 12' (3.7m.) lead
Geartrain: 3-Stage Planetary
Gear Ratio: 156:1
Lubrication: Aeroshell #17
Clutch (freespooling): Sliding Ring Gear
Brake: Automatic Direct Drive Cone
Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)
Weight: 74 lbs. (34 kgs.)
Wire Rope for PN 45880, 458802, 465052: 80', 5/16" diameter (24m,
8mm diam.)
Wire Rope for PN 37960: 50', 5/16" diameter (15m, 8mm diam.)
Fairlead for PN 45880, PN 458802, PN465052: Roller
Fairlead for PN 37960: Hawse
Recommended Battery: 650 CCA minimum for winching
Battery Leads: 2 gauge, 72" (1.83m)
Finish: Argent Gray Powder Coat
Nuts/Bolts: PN 39625
CE Winches: CE products are designed to meet European Standards. CE winches
include CE labels, manuals, roller fairlead, safety hook and thimble.
|
|
|
|
M6000 SDP SHORT-DRUM PORTABLE
A short-drum portable winch for light sport utility vehicles, the 4.8
hp M6000 SDP provides plenty of pulling power, can be mounted single-handedly,
and stores in a snap. This compact winch comes complete with handle/mounting
system for a Class III 2" receiver, hawse fairlead, remote control
with 12' lead, free spool clutch, 50' of 5/16" wire rope and power
lead with Quick Connect plug for the front of the vehicle. The perfect
companion when you take your rig off-road, hunting, fishing or skiing.
This Kit includes winch with built-in carrier, remote, power lead with
Quick Connect plugs for front of vehicle and hawse fairlead. Front receiver
and rear power cables sold separately.
M6000 SDP SPECS/PART NUMBERS
Part Number: PN 39116
Rated Line Pull: 6000 lbs. (2722 kgs) single-line
Motor: 4.8 hp, Series WoundTM
Remote Control: Remote switch, 12' (3.7m) lead
Geartrain: 3-Stage Planetary
Gear Ratio: 156:1
Lubrication: Aeroshell #17
Clutch (freespooling): Sliding Ring Gear
Brake: Automatic Direct Drive Cone
Drum Diameter/Length: 2.5"/5.0" (26.4cm/13cm)
Weight: 72 lbs. (31 kgs.)
Wire Rope: 50', 5/16" diameter (15m, 8mm diam.)
Fairlead: Hawse
Recommended Battery: 650 CCA minimum for winching
Battery Leads: Front heavy-duty 7.5'/2.2m with quick connect plug
Finish: Argent Powder Coat
|
